WESCORP ESD HI
TEMP POLYIMIDE TAPE
July 18, 2011
For Immediate Release
Contact: Dave Bermani
Wescorp brand ESD Hi Temp Polyimide Tape is a low-charging tape
that can be exposed to high temperature applications such as wave
soldering. The polyimide film is 2.4 mils thick. It will not leave
a residue when removed. The tape generates less than 50 volts (at
73º, 45% RH average) when unwound from the roll, making it
safe to use around most ESD sensitive components. Adhesive surface
resistance is 10E4 - 10E8 ohms. Temperature resistant to 572º
F / 300º C for 10 seconds max. The tape is lead-free and RoHS
compliant. Four widths are available: ¼", ½",
¾" and 1". All are on 3" cores.
additional information contact Desco at firstname.lastname@example.org or phone
3651 WALNUT AVE., CHINO, CA 91710 - 909-627-8178 - FAX 909-627-7449
Journal is not affiliated with any trade organization, Association or
Journal & esdjournal.com are Trademarks of Fowler Associates, Inc.
- All Rights Reserved
content & Look of the ESD Journal & esdjournal.com are Copyrighted
by Fowler Associates, Inc. - All Rights Reserved Copyright 2011
YouTube name and logo are copyright of YouTube, LLC.