Protektive Pak’s new ESD Dissipative Turntable is
ideal for working on heavier assemblies in an ESD Protected Area
(EPA). It is ESD protective for use with ESD sensitive assemblies
and meets worksurface requirement limit of ANSI/ESD S20.20 per ANSI/ESD
S4.1 and ESD TR53. Electrostatic charges are removed to ground via
contact on a grounded ESD worksurface or via an available ground
cord from an attached ring terminal. It features durable ¼”
thick conductive, crosslink polyethylene foam, a volume resistance
of 1 x 10E6 to < 10 x 10E9 ohms per ANSI/ESD S4.1 and ESD TR53,
and has a very low profile of just 1 inch high. The turntable is
available in two sizes: 12 ½” and 15 ½”. This product
is made in the United States of America.
47200 -ESD DISSIPATIVE TURNTABLE, 12.5''
47201 -ESD DISSIPATIVE TURNTABLE, 15.5''
For additional information please contact:
13520 Monte Vista Ave.
Chino, CA 91710